Home Keline^® structured cabling system Copper cabling Cat. 6A / Class E_A system

Cat. 6A / Class E_A system

The Cat. 6A / Class E_A system allows for a 10 Gigabit/s transmission speed, guarantees the transmission of all standardized protocols including 10GBASE-T and ensures a bandwidth of 500 MHz.
This system is disadvantaged from a long-term perspective as only components from a certain manufacturer are suitable for this solution.
From 2006 to 2010, Cat. 6A / Class E_Asystems played a major role, as they were the only way to implement cabling with performance of 10 Gigabit/s.
This solution has been surpassed by the advantages of Cat. 6_A interoperable components. The Cat. 6A / Class E_A systems meets the expectations and needs of users with the highest demands on the quantity of transferred data.

Definitions and features

The Cat. 6A / Class E_A system is a group of products, creating a channel that complies with channel level requirements of Category 6A and Class E_A performance defined in the U.S. standard TIA-568.2-D:2018 and international standard ISO/IEC 11801-1:2017 (Ed. 1.0) on the channel level. The certificate confirming compliance with the standards lists the tested topology and all the components. Certification on the permanent link level for Cat. 6A / Class E_A system is not sufficient and is for informational purposes only.

Cat. 6A / Class E_Asystem cabling ensures:

Immunity to electromagnetic interference and Alien Crosstalk.
Performance category Cat. 6A and Class E_A for channel topology mentioned in the certificate only (one of the following: 2 -, 3 - or 4 - connector channel).
Performance category Cat. 6A and Class E_A for channel with components mentioned in the certificate.

Warranties, certificates and quality control

Keline Cat. 6A / Class E_Asystem is certified for 2-connector channel by 3P international independent laboratory according to IEEE P802.3an Class E_A ISO/IEC 11801-1:2017 (Ed. 1.0), ISO/IEC 11801-2:2017 (Ed. 1.0), EN 50173-1:2011, Category 6A ANSI/TIA-568-C.2: 2009.
Note: Installation cables and patch cables used in the Keline Cat. 6A / Class E_A system are also Cat. 6_A interoperable components certified on a component level.
A 25-year warranty is applied on all installations performed by certified “Keline installer” and “Keline planner” after an audit of test data.